Samsung 6000 Installation Manual page 23

Customer Logo (Hotel Logo)
¦
Customer Logo is a function that displays picture image or Video file which represents hotel during power on procedure.
– Customer Logo will be in hotel option menu in both Standalone and Interactive mode.
– Lower menus will be enabled when Customer Logo option is on.
– Customer Logo will be displayed if there is picture image or video file which is already stored in memory and Customer
Logo option is on during power on procedure.
– Customer Logo will not be displayed when Customer Logo option is off, even if the picture image or video file exists.
Hotel Mode
SI Vendor
Samsung
Power On Channel
Channel Type
Power On Volume
Min Volume
Max Volume
Panel Button Lock Unlock
Power On Source
Picture Menu Lock
Channel Editor
Music Mode AV
Music Mode PC
Music Mode Comp
Music Mode Backlight
y Customer Logo
– This option is to decide if customer logo image or video file will be displayed or not.
y Customer Logo Download
– This option downloads the logo image or video file to TV memory from a USB device.
– Wait will be displayed while the file is copied to the TV.
– Completed will be displayed when the copy operation has finished successfully.
– Failed will be displayed when the copy operation was unsuccessful.
– No USB will be displayed when USB device is not connected.
– No File will be displayed when there is no file to copy in USB.
y Logo File Format (Picture)
– Only BMP format is supported and File name must be samsung.bmp.
– Maximum resolution is 960 x 540.
– Image is not changed on a large or small scale during power on.
y Logo File Format (Video)
– Only AVI format is supported and File name must be samsung.avi.
– AVI file max 50MB, max 1920*1080, no up & down scale
– If press CH UP/DOWN Key or
logo.
y Logo Display Time
– This option is to decide Logo display time of the picture image.
– 3 sec / 5 sec / 7sec
UC6900 호주_중아, UC6000 구주 호텔.indd 23
ON RJP Priority AV 1 Energy Saving
RJP Priority PC Clone TV to USB
2
1 RJP Priority HDMI 3 Clone USB to TV
RJP AV Option Cloning Data Reset
ATV AV1
RJP HDMI Option Welcome Message
10 HDMI1/DVI
0 Sub Amp Volume 6 Edit Welcome Message
Sub Amp Mode Channel Auto Store
100 2
Local time Manual Dynamic SI
Audio Loop In
TV OFF
OFF Menu Display ON
Customer Logo
OFF
OFF Logo Download ...
OFF Logo Display Time ...
OFF Power On Option Last Option
Auto Source
OFF OFF
EXIT KEY with Samsung remote controller, you can stop displaying the customer video
OFF
OFF
OFF
OFF
23
English
2010-04-27 오후 2:24:45