Temperature Controller Manual - RAPA E Original User Manual

10. TEMPERATURE CONTROLLER MANUAL

DISPLAY DESCRIPTION
The display is three digits with decimal point and 6 symbols (compressor, fan,
defrost, AUX, alarm and clock).
1. COMPRESSOR
The symbol is visible when the compressor operates. It flashes when the
compressor's start up is delayed because of protective procedure. It flashes in the
cycle: two flashes – break when there is continuous operation mode activated.
2. FAN
The symbol is visible when there are evaporator fans switched on. It flashes when
the fans start-up is delayed by means of external switching off or when there
is other procedure in progress.
3. DEFROST
The symbol is visible when there is defrost function switched on. It flashes when
the defrost start-up is delayed by means of external switching off or when there is
other procedure in progress.
4. AUX
The symbol is visible when there is additional AUX output activated.
5. CLOCK
The symbol is visible when there is clock switched on – switching on by means of
„tEn" switch or when there is time limit set. When switching on the symbols
appears for few seconds as clock function availability.
6. ALARM
The symbol is visible when there is alarm activated.
SWITCHES DESCRIPTION
Information: Short pressing of any of the switches causes appearance of message
related to the currently active function.
11