Connecting to a Power Source
Using the batteries
1. Open the battery chamber
cover by pushing in the
direction of the arrow.
Removing the battery
INFORMATION
When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
16
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
2. Insert the batteries taking
note of the polarity (+ / -).
1. Turn off the camera power. Open the battery chamber
cover and move the battery holder aside. The battery will
be released.
2. Take out the battery and close the battery chamber cover.
The batteries are fully
charged
3. To close the battery
Prepare new batteries
chamber cover, push it
until it clicks.
There is no battery capacity.
Replace with new batteries.