Yealink T43
Quick Tips
PLACE A CALL
Pick up the handset, or press the
•
Headset
or the
Speaker
Dial number, and then press the
•
Send
soft key
ANSWER A CALL
Pick up the handset.
•
Press the
Headset
key
•
Press the
Speaker
key
•
Press the soft
Answer
key
•
VIEW RECENT CALLS
Press the
Call Log
soft key to view
•
lists of recent calls... you may look
at All, Missed, Placed, or Received.
Use the navigation pad to
switch list views, scroll, and
select list items:
Switch between the call lists
Scroll through listings
OK
Press the
button to select.
While viewing Recent Calls you may
also:
Select a listing and press
•
call the number
Select a listing and press the
•
Option
soft key to see details
Examples provide typical steps for usage of the standard configuration setup. Contact customer service for assistance with customized configurations.
888.538.3960 | www.momentumtelecom.com/support
HOLD & RESUME
On hold call displays only on the device used
to place the call on hold.
key and dial.
While on an active call press the
•
Hold
side of phone.
Press the same
•
resume the call before picking up
the handset.
Press the
•
Call can also be resumed by using
•
the
Resume
TRANSFER CALLS
Transfer calls to any extension
Consulted/Warm Transfer
Press
key
Enter or select the extension or
phone number and press Send,
OK
Speak to the recipient and press
again to send the call when ready.
Blind Transfer
Press
Send
to
Dial or select the ext/phone number
Press
key again.
button located on the right
Hold
button to
Hold
soft key
soft key.
or
tap the
Transfer
soft
#
or the
button to dial
or tap the
Transfer
soft key
or tap the
Transfer
soft key
Transfer
or tap the
soft
PARK & RETRIEVE CALLS
Parking allows any extension to pick up
without transferring it
To
Park
a call:
1. Press and hold the Transfer soft key
(bottom of the display) or press the @
button.
2. Press 1 of the 4 park line buttons
labeled Park 1, 2, 3, or 4.
Note: When you Park a call, all phones
will show the call "Parked" on that line
and allow anyone to answer the call.
3.
Call the extension and inform them they
have a call on Park Line 1, 2, 3, or 4.
4.
Staff now can press the Park 1-4 line
you specified to accept the call
END CALLS
You can only end active calls. To end an On Hold
call, you must resume the call first.
To End an Active Call:
Replace the handset in the cradle.
End Call
Press the
soft key at the bottom
of the display.
Press the
Headset
button to end if using
a headset
Press the
Speaker
button to end if
using speakerphone