Washing Detergents And Care Agents; Which Washing Detergent And Care Agent; How Much Washing Detergent And Care Agent; Water Softener - AEG KO-LAMAVAT 76730 User Information

Washing Detergents and Care Agents

Which washing detergent and care agent?

Use only washing detergents and care agents which are suitable for use
in washing machines. Always follow the manufacturer's instructions.

How much washing detergent and care agent?

The amount to be used depends on:
• the dirtiness of the washing
• the hardness category of the mains water supply
• the filling quantity
If the detergent manufacturer gives no details of the dosing quantities
2
for minimum loads, add one third less for half loads and, in the case of
very small loads and for EASY IRON, only half the amount of detergent
recommended for a full load.
Refer to the detergent/care agent manufacturer's instructions on use
and dosage.

Water softener

For medium to high water hardness (hardness class II upwards), you
should use softener. Refer to the manufacturer's instructions. Then al-
ways add the appropriate amount of detergent for hardness class I
(= soft). The responisable water works will provide information on the
local water hardness.
Since the water softener is rinsed in before the main detergent (water
2
pre-softening), 80% of the stated quantity of softener shown on the
package is sufficient.
Water hardness details
Hardness class
I - soft
II - medium hard
III - hard
IV - very hard
Water hardness in °dH
(German hardness scale)
0 - 7
7 - 14
14 - 21
greater than 21
Operating Instructions
Water hardness in mmol
(millimol per litre)
to 1.3
1.3 - 2.5
2.5 - 3.8
greater than 3.8
17