V-Linear Adjustment/Confirmation (4:3 Mode) / (16:9 Mode For Wide Models); Deflection (16:9 Mode) Confirmation - Panasonic TX-34P180RB Service Manual

4.4. V-LINEAR ADJUSTMENT/CONFIRMATION (4:3 MODE) /
(16:9 MODE for wide models)
4.4.1. 100i V-LINEAR ADJUSTMENT (4:3 MODE) / (16:9 MODE for wide models)
1. Receive PAL monoscope pattern E11. (Scan mode = AUTO)
2. Confirm V-Linear as fig. 6
If need adjust V-Lin
* Not APPLICABLE FOR WIDE MODELS
4.5.

DEFLECTION (16:9 MODE) CONFIRMATION

4.5.1. V-AMP CONFIRMATION (100i / 50p)
1. Receive PAL monoscope patern E-11.
2. Set the aspect to 16:9
3. Set scan mode to AUTO.
4. Confirm that A & B in the fig 7 is 6.0cm ± 1.0cm
5. Set the scan mode to PROGRESSIVE.
6. Confirm that A & B in the fig 7 is 6.0cm ± 1.0cm
4.5.2. V-AMP CONFIRMATION (120i / 60p)
1. Receive NTSC monoscope patern US-13.
2. Set scan mode to 100Hz.
3. Confirm that A & B in the Fig 7 is 6.0cm ± 1.0cm
4. Set scan mode to AUTO.
5. Confirm that A & B in the Fig 7 is 6.0cm ± 1.0cm
4.5.3. V-AMP CONFIRMATION (525p / 625p)
1. Receive monoscope pattern at 525p 60Hz YUV input
2. Set the aspect to 16:9
3. Confirm that A & B in the Fig 7 is 6.0cm ± 1.0cm
4. Receive monoscope pattern at 625p 50Hz YUV input
5. Set the aspect to 16:9
6. Confirm that A & B in the Fig 7 is 6.0cm ± 1.0cm
17
TX-34P180RB- / MIDDLE EAST