PCS100 AVC-20 User Manual
6.1.7
Summary Page
The Summary Page shows the running totals of power quality events in various voltage ranges.
The totals are cleared via parameter 06 Reset Power Quality.
The time the summary was last cleared is shown at the bottom of the page.
6.2 Module Display Boards
The rectifier and inverter modules contain their own display boards which contain the RUN and OK LEDS, as well
as 2 x 7 segment LED displays.
The 7 segment displays show the individual module identification number (1 – 32), however if there is an error
condition, they will flash alternately every 500 ms the module identification number and an error code. On start-
up they will show L0 and L1 indicating the states in the start-up sequence.
Figure 6-12: GDM Summary Page
Figure 6-13: Module Status LEDs
1.
segment LED
display
OK LED
RUN LED
43