Auto Adjustment - Samsung SyncMaster 520DX User Manual

Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images
with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the
Coarse adjustment and then use Fine again.
(Available in PC mode only)
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock]
Coarse
MENU →
→ [Coarse] → , → ENTER
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may
relocate it to the center using the horizontal control menu.
Fine
MENU →
→ → [Fine] → , → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after
adjusting the frequency (clock speed).
H-Position
MENU →
ENTER→ [H-Position] → , → ENTER
Adjusts the screen location horizontally.
V-Position
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → → →
→ ENTER → [V-Position] → , → ENTER
Adjusts the screen location vertically.

Auto Adjustment

MENU → → ENTER → [Picture] → → → → → → ENTER → [Auto Adjustment ]
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the
control panel, the auto function is performed.
Adjusting the LCD Display
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ → → → ENTER → [Image Lock] → ENTER
→ → → → ENTER → [Image Lock] → ENTER
→ → → → ENTER → [Image Lock] → → →