Table of Contents
Advertisement
2.1 Lifting and Moving the Machine
Check that the equipment and accessories used to lift the machine (belts, cables, hooks) are
capable of supporting the weight of the machine as indicated on the identification plate.
Bring the machine down onto the floor with the greatest care avoiding sudden drops and
hazardous jerks.
Never hook belts directly onto the mobile beam (1) or to the machine base (2), to avoid
irreparable damage to the structure. Use the four lugs (3) provided for lifting.
The lifting equipment should be inserted by skilled persons to avoid damaging the machine
and to prevent the load from sliding.
1
2
3
2.2 Machine Leveling
This machine does not need a foundation, but an industrial floor with a thickness of concrete
of at least 100mm must be provided.
It is necessary for the machine to be correctly leveled. Remove the protection covers on both
supporting shoulders of the mobile gantry. Place the spirit level (1) on the guide on the right side
support shoulder. Adjust the leveling screws located on the support feet (2) at the base of the
machine.
Repeat the same operations for the left side support shoulder.
2.Installation
1
4
3
Advertisement
Table of Contents
