Samsung SyncMaster 910MP Owner's Manual page 29

environment depending on the contents of the image you are
watching.
Currently four different modes are available: Entertain, Internet,Text
and Custom.
Each mode has its own pre-configured brightness value. You can
easily select one of four settings by simply pressing the
MagicBright™ control button.
- The direct button on the remote control is 'M/B' button.
1) Entertain
: High Brightness
For watching motion pictures such as a DVD or VCD.
2) Internet
: Medium Brightness
For working with a mixture of images such as text and graphics.
3) Text
: Normal Brightness
For documentations or works involving heavy text.
4) Custom
Although the values are carefully chosen by our engineers, the pre-
configured values may not be comfortable to your eyes depending on your
taste.
If this is the case, adjust the Brightness and Contrast by using the OSD
menu.
Custom You can use the on-screen menus to change the contrast and
brightness according to personal preference.
1) Contrast
: Adjust the Contrast.
2) Brightness
: Adjust the Brightness.
If you adjust picture using Custom function, MagicBright will turn to Custom mode.
Colour Tone The tone of the color can be changed. The individual color DTVs are
also user customizable.
1) Cool
2) Normal
3) Warm
4) Custom
Colour Adjust the individual R, G, B Colour Controls.
Control
1) Red
2) Green
3) Blue
If you adjust picture using Colour Control function, Colour Tone will turn to Custom mode.
Image Lock Image Lock is used to fine-tune and get the best image by removing
noise that creates unstable images with jitter and shimmer. If
satisfactory results are not obtained using the Fine adjustment, use
the Coarse adjustment and then use Fine again.
1) Coarse
: Removes noise such as vertical stripes. Coarse
adjustment may move the screen image area. You may
relocate it to the center using the Horizontal Control menu.
2) Fine
: Removes noise such as horizontal stripes. If the noise
persists even after Fine tuning, repeat it after adjusting the
frequency (clock speed).
3) Sharpness
: Adjust the picture sharpness.
4) Position
: Adjusts the screen location horizontally and vertically.
Auto The values of Fine, Coarse, Position are adjusted automatically.
Adjustment If you change resolution in the control panel, Auto function will be executed.
- The direct button on the remote control is 'AUTO' button.
PIP Picture You can adjust the PIP Screen Settings.
1) Contrast
: Adjusts the Contrast of the PIP window on the screen.
2) Brightness
1) Coarse /
2) Fine /
3) Sharpness
4) Position