Samsung SyncMaster 275T User Manual page 16

Brightness button [ ]
Enter button [ ] /
SOURCE button
AUTO button
PIP button
Power button [ ]
Power indicator
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER S/W / POWER
This will save power and reduce eye fatigue.
4) Custom
Select this mode when you want to adjust the image according to your
preferences.
>> Click here to see an animation clip
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Activates a highlighted menu item. /
Push the ' ', then selects the video signal while the OSD is off. (When
the button is pressed to change the input mode, a message appears
in the upper left of the screen displaying the current mode -- Analog,
Digital, AV, S-Video and Component input signal.)
Changing the source is only allowed for external devices that are
connected to the monitor at the time.
>> Click here to see an animation clip
(Available in Analog mode only)
When the 'AUTO' button is pressed, the Auto Adjustment screen appears
as shown in the animated screen on the center. Auto adjustment allows
the monitor to self-adjust to the incoming video signal. The values of fine,
coarse and position are adjusted automatically.
>> Click here to see an animation clip
( Available in Analog/Digital Mode Only )
In Analog or Digital Mode, turns on Video screens in PIP Mode.
You can view a picture from AV, S-Video, or Component through the PIP
screen in Analog and Digital (PC) mode.
Turns the monitor On/Off.
This will enable you to see the overall power status of the system. For more
information, see the PowerSaver
POWER S/W
: Switch the monitor on and off.
section.