Connections; Phones/Output Jack - Casio LK-40 User Manual

Connections

I Phones/Output Jack
Before connecting headphones or other external equipment, be sure to first turn
down the volume settings of the keyboard and the connected equipment. You can
then adjust volume to the desired level after connections are complete.
[Rear Panel]
3
Keyboard amp,
guitar amp,etc.
Connecting Headphones (Figure 1)
Connecting headphones cuts off output from the keyboard's built-in speakers, so you
can play even late at night without disturbing anyone.
Audio Equipment (Figure 2)
Connect the keyboard to an audio equipment using a commercially available con-
necting cord with a standard plug on one end and two PIN plugs on the other end. In
this configuration, you normally set the input selector of the audio equipment to the
terminal (usually marked AUX IN or something similar) where the cord from the
keyboard is connected. See the user documentation that comes with your audio
equipment for full details.
Musical Instrument Amplifier (Figure 3)
Use a commercially available connecting cord to connect the keyboard to a musical
instrument amplifier.
Note
• Be sure to use a connecting cord that has standard plugs on the ends you connect to
the keyboard and amplifier.
E-12

PHONES/OUTPUT Jack

PHONES/
DC 9V
OUT MIDI IN OUTPUT
Standard plug
1
PIN plug
White Red
2
LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
478B-E-014B