Advertisement
Quick Links
Advertisement
Related Manuals for GoPlus SP36602
Summary of Contents for GoPlus SP36602
- Page 1 USER'S MANUAL MOTORIZED TREADMILL SP36602...
- Page 2 1. CAUTION To avoid any hurts, please read this manual carefully before using. ◼ For safety purpose, do not stand on running belt while start. ◼ Please stop immediately if you experience any kind pain, including but not limited to chest pains, nausea, dizziness, or cramp.
- Page 4 5. PRODUCT SPARE PARTS 6. PRODUCTS MAIN PARTS...
- Page 5 7. ASSEMBLY ① Place the treadmill on level ground, unfold the treadmill by hand carefully. (See Fig 1) ② Fix the frame to the base with 1 x M8*40 screw and 1 x M8*16 screw on each side, do not tighten them in this step(See Fig 2) ③...
- Page 6 8. CONSOLE INSTRUCTON 1. “START” key: During STAND BY or COUNTDOWN mode(H1~H3), press “START” key, SPEED window will show “3 2 1 0” to start working. TIME starts counting from 0:00~99:59 and restart. The default speed is 1.0KM/H. “STOP” key: During working, press “STOP” key and the machine will be stopped. Press “STOP” key for 2 seconds, the system will reboot.
-
Page 7: Auto Program
speed +- to adjust the data. With all the data being set up, press Mode Key, and the display will show “---”. Put your hand on touch heart frequency key, and the program can calculate your body index. Default data and setting range Parameter Default Data Setting Range... -
Page 8: Folding Up And Setting Down
9. FOLDING UP AND SETTING DOWN Fold： Turn on the fixed knob then lift the running board to assemble the machine.Pull out the tension knob,aimed at the platform then release the knob to fix the machine.Move the machine. Unfold： Pull out the tension knob then fall down the running board and fix the machine with the fixed knob then use the machine after electrify. -
Page 9: Running Belt Adjustment
RUNNING BELT ADJUSTMENT (1) Running belt deviate to left Start the machine by speed at 2-3KM/H without loading, use Allen wrench to screw the bolt 1/4 turn clockwise (see fig1). Keep the machine running without loading for 1-2 minutes to gauge. Repeat the previous step if more adjustment is needed, until the belt moves to the center. -
Page 10: Troubleshooting
TROUBLE SHOOTING Error Code Meaning Problem Solution 1. Put safety key in the yellow area of panel Safety key is not on Err(or E00) No Safety key on Panel 2. Err(or E00) still shows or there is no function, the panel or it is not change the computer screen/display monitor. - Page 11 CANADA UNITED KINGDOM RUSSIA GERMANY FRANCE UNITED STATES ITALY JAPAN SPAIN AUSTRALIA TIPS： Your suggestions and comments for Costway are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click.
Need help?
Do you have a question about the SP36602 and is the answer not in the manual?
Questions and answers