Adp-Hm Prerequisites And Pre-Staging Considerations - Nokia 7705 SAR-Hm Installation Manual

7705 SAR-Hm and 7705 SAR-Hmc Overview
3.7 ADP-Hm Prerequisites and Pre-staging
In order for ADP-Hm to function, a number of prerequisites must be completed in
advance of initial power-up of a 7705 SAR-Hm and 7705 SAR-Hmc. Refer to the
7705 SAR-Hm Main Configuration Guide for a list of prerequisites for ADP-Hm.
Consideration must be given to when and where initial power-up of the node occurs.
ADP-Hm supports two installation options that can be configured on the
NSP NFM-P before the initial boot-up of the 7705 SAR-Hm or 7705 SAR-Hmc. The
options are:
78
Considerations
a. The 7705 SAR-Hm or 7705 SAR-Hmc can be booted for the first time at a
pre-staging facility, where it is initialized, secured, partially configured, and then
shut down. The router is then shipped to the installation site, installed, and
booted again, at which time the configuration process is completed.
b. The 7705 SAR-Hm or 7705 SAR-Hmc can be installed on site, where it is booted
for the first time, initialized, and configured.
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
SAR-Hm and SAR-Hmc Chassis Installation Guide
3HE 17810 AAAA TQZZA