Replacing Batteries; Optional Control - Wall Control - Sea Breeze SHE9H4ZIGB Installation And User Manual

REPLACING BATTERIES

The battery cover is fixed on the remote with a screw. Please unscrew it
for the very first time. (For easy use, the screw is unnecessarily to be
installed back after the batteries is placed.)
Slightly press down on the arrow on the battery cover and slide in the
direction of the arrowhead .
Remove old batteries. Insert two new AAA 1.5V batteries, paying attention to
the polarity. Re-install the back cover of wireless remote control.
NOTE:
D o not use the old, different, or rechargeable batteries.
If the wireless remote control will not be used for a long period of time, remove the batteries.
If the wireless remote control does not operate properly, remove the batteries for 30 seconds and re-
install (resets the remote).
● The Cassette unit operates with a wired wall control MSWCH. Using the Signal cable connect to
the printed circuit board connector CN9 in the unit and wall control.
● Wall Control can be controlled with the remote or at the panel.
● Please refer to the manual 950-0210 for detail operation and 950-0220 for detail installation of the
wall control.
950-0234revC

OPTIONAL CONTROL - WALL CONTROL

- 11 -
Signal Cable
Wall Control
Signal Receiver
(From the Remote Control)
Remote
Control
June 7, 2021