Table of Contents
Advertisement
SCH-411(E-Ta)
4/8/99 5:28 PM
Using Voice Dialing
Placing a Call
To place a call using Voice Dialing:
1.To place the call, press and hold
the flip, depending on the setting.
2.At the voice prompt, say the name into the phone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name
after two attempts, the message "Cannot
Recognize Name. Please check name." displays.
Try the call again later, or check the recorded
name.
Reviewing Voice Dialing Entries
To review Voice Dialing entries:
1. Press
to display the Main Menu.
2. Press
6
for Voice Dial.
MNO
3. Press
2
for Review. A list of entries displays.
ABC
4. Press the digit key to select the desired entry, or
press the scroll keys to scan entries. The recorded
names play audibly as you scroll through the list.
5. Press
to return to Standby mode.
END
46
Page 46
Erasing Voice Dialing Entries
To erase an individual Voice Dialing entry:
1. Press
2. Press
, or open
3. Press
4. Press the digit key to select the desired entry, or
5.When the desired entry displays, press
6. Press
To erase all Voice Dialing entries:
1. Press
2. Press
3. Press
4. Press
to display the Main Menu.
6
for Voice Dial.
MNO
2
for Review. A list of entries displays.
ABC
press the scroll keys to scan entries. The recorded
names play audibly as you scroll through the list.
select that entry.
to erase the selected entry.
to display the Main Menu.
for Voice Dial.
6
MNO
3
for Erase All.
DEF
to erase all Voice Dialing entries.
47
to
Advertisement
Table of Contents
