Table of Contents
Advertisement
SCH-411(E-Ta)
4/8/99 5:25 PM
Placing Calls
Placing a Call
To place a call:
1. Press and hold
to power on your phone. An
active screen display indicates that the phone is
on. (No dial tone sounds.)
2. Enter the phone number, up to 36 digits, by
pressing the digit keys. The phone number
displays on the screen.
3. Press
. The phone places the call to the
SEND
entered phone number.
Emergency Dialing
You can place calls to one of the three emergency
numbers that are in your emergency number list even
if your phone is locked.
Prepend Dialing
The prepend option enables you to add up to three
digits, such as area codes and network feature
activation codes, to a phone number of up to 10 digits.
You can prepend a phone number before dialing, or
prepend an existing entry in the Phone Book or Call
Logs.
To use prepend, select one of the following options:
• Enter the area code or feature activation code, and
then enter the phone number.
• Access a phone number stored in the Phone Book
or Call Logs, and then prepend the number.
18
Page 18
To prepend existing phone numbers in the Phone
Book or Call Logs:
1.Access the phone number entry.
2.When the phone number displays, press
3. Press
4. Enter the area code or feature code.
5. Press
Correcting a Misdialed Number
To correct a misdialed number:
• Press
• Press and hold
Receiving Calls
Answering a Call
To answer an incoming call, press
flip.
Ending a Call
To end a call, press
time displays, along with the name/number of the
called party (if available). The phone returns to
Standby mode automatically.
display context-specific options.
3
for prepend.
DEF
to call the number.
SEND
to erase the digit, and then enter the
correct dlgit.
to erase the entire entry, and
then enter the correct phone number.
, or open the
SEND
, or close the flip.The call
END
19
to
Advertisement
Table of Contents
