Advertisement
TUB RACK ASSEMBLY MANUAL
7.
Drill holes.
Use 3mm drill bit for pilot hole
followed by 10mm drill bit for
final hole.
Tip: De-bur holes and apply
enamel paint on bare metal to
avoid rust.
8.
Place tub rack on top of ute tub.
Align holes and fit M10 Hex bolts to
all 4 legs.
Once bolts, washers and nuts have
been seated, tighten all.
Vehicle mounting
Fixings used:
8 M10 50mm Hex bolts (F)
4 M10 30mm Hex bolts (H)
12 M10 Nuts (J)
24 M10 Flat washers (L)
12 M10 Spring washers (N)
7
Remove backing from protective rubbers
and stick down over holes flush with
inside lip.
TM
Advertisement
