Advertisement
TUB RACK ASSEMBLY MANUAL
3.
Attach Legs/Elbows to each end of Cross Beam (C)
Create 2 hoops.
Do not over tighten at this stage
Fixings used:
16 M8 Hex bolts (G)
16 M8 Nuts (I)
32 M8 Flat washers (K)
16 M8 Spring washers (M)
4.
Join hoops together by attaching minimum 4 Rails (D)
Do not over tighten at this stage
Fixings used:
24 M8 Hex bolts (G)
24 M8 Nuts (I)
48 M8 Flat washers (K)
24 M8 Spring washers (M)
Tub Rack Assembly
Slide until vertical flanges fit withing internal tub lip measurement.
Final adjustments can be done at mounting stage.
5
TM
Advertisement
