Advertisement
TUB RACK ASSEMBLY MANUAL
1.
Measure internal width of tub.
When assembling tub rack, vertical flanges of tub legs must fit within this measurement.
Note: Allow 10mm narrower to
begin with as final adjustments
can be made later.
2.
Assemble 4 sets of uprights using
4 Legs (A) and 4 Elbows (B).
Do not over tighten at this stage
Fixings used:
16 M8 Hex bolts (G)
16 M8 Nuts (I)
32 M8 Flat washers (K)
16 M8 Spring washers (M)
Note: Allow 2 hole overlap
Tub Rack Assembly
4
Measure here
TM
Advertisement
