Table of Contents
Advertisement
Settings
(Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Text message
(Menu 5.5.1)
You can configure default SMS settings for sending or
receiving messages.
•
Send settings: set up the following options for
sending a text message:
Reply path: allow the recipient to reply to you
through your message centre.
Delivery report: set the network to inform you
when your message has been delivered.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Uni-
code if you enter an Uni-code character. Use of
Uni-code encoding will reduce the maximum
number of characters in a message to about half.
If this menu is not shown, your phone provides the
Automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
•
Current profile: select a profile.
•
Profile settings: set the following properties in a
profile:
Service centre: store or change the number of
your message centre.
Default destination: enter the default
destination. It will be displayed in the first field on
the Recipients field.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS centre while
attempts are made to deliver them.
Setting name: enter a profile name.
55
Advertisement
Table of Contents
