Table of Contents
Advertisement
ENGLISH
Disconnect the appliance from the electrical supply before
•
maintenance.
Do not use a steam cleaner to clean the appliance.
•
If the glass ceramic surface / glass surface is cracked, switch
•
off the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction
box, remove the fuse to disconnect the appliance from
power supply. In either case contact the Authorised Service
Centre.
In case of hotplate glass breakage:
•
shut immediately off all burners and any electrical
–
heating element and isolate the appliance from the
power supply,
do not touch the appliance surface,
–
do not use the appliance.
–
If the supply cord is damaged, it must be replaced by the
•
manufacturer, the Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
Where the appliance is directly connected to the power
•
supply, an all-pole isolating switch with a contact gap is
required. Complete disconnection in compliance with the
conditions specified in overvoltage category III must be
guaranteed. The earth cable is excluded from this.
When you route the mains cable, make sure that the cable
•
doesn't come into direct contact (for example using
insulating sleeving) with parts that can reach temperatures
of more than 50°C above room temperature.
WARNING: Use only hob guards designed by the
•
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
6
Advertisement
Table of Contents
