Replacement Of Camera Ass'y (Evi-371A/For Ce Model) - Sony VID-P110 Service Manual

2-2-15. Replacement of Camera Ass'y
(EVI-371A/for CE model)
NOTE : When folding or locking of camera arm with-
out camera block, be careful the rebounding of
the camera arm as shown in below.
2-12 (E)
1. Remove five screws (B2.6x6), then remove case A/B.
Case A
screw
(B2.6x6)
2. Disconnect three connectors on camera block.
3. Remove four screws (B2.6x6) , then remove front frame.
4. Remove three step screws, then remove camera block
with the bracket.
5. Remove four screws "a" (K2x3) and three screws "b"
(P2x3), then remove the bracket from camera block.
Step
screw
Step
screw
screw "a"
(K2x3)
Camera block
(EVI-371A)
Front case
screw
(B2.6x6)
Case B
screw
(B2.6x6)
Bracket
screw "b"
(P2x3)
connectors
screw "b"
(P2x3)
screw
screw
(B2.6x6)
(B2.6x6)
VID-P110