Removal Of Lampshade B; Removal Of Lampshade A - Sony VID-P110 Service Manual

2-2-11. Removal of Lampshade B

1. Remove one screw (PTP2.6x8).
2. Slide lampshade B in the direction of arrow B while
releasing two claws.
Lampshade A
screw
(PTP2.6x8)
VID-P110
Lampshade C
claw
Lampshade B
2-2-12. Removal of Lamshade A
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Remove the lampshade B. (Refer to section 2-2-11.)
4. Disconnect one connector (CN6) on PS-517 board and
pull out two contacts from the connector housing.
5. Disconnect fluorescent lamp from the socket.
6. Remove two screws "a" (PTP2.6x6) and remove lamp
holder and reflection plate.
7. Remove two screws "b" (PTP3x10) and then remove
socket fixing plate.
8. Pull out the socket.
9. Remove the nut, wave washer, polyslider washer and
friction plate, then remove lampshade A.
Lampshade
connecting plate
Friction plate
Lampshade A
Reflection plate
Lamp holder
Fluorescent lamp
Lampshade C
Socket
fixing plate
Contact
screw "b"
(PTP3x10)
Plyslider
washer
screw "a"
(PTP2.6x6)
Wave
washer
screw "a"
Nut
(PTP2.6x6)
Socket
2-9 (E)