5. Docking Bracket Installation
When installing the SmartPunch Plus downstream from the MX-RB18(Curl
Correction Unit)
When Install the SmartPunch Plus downstream to MX-CF11(Inserter Unit)
Sharp SmartPunch Plus Installation Manual
The docking brackets are shipped in a
separate bag along with M4-8mm long
round tipped mounting screws (not
shown).
Install the supplied docking brackets as
shown with the bracket marked "R" on
the right side facing you as you look at
the exit side of the upstream device.
Install the bracket marked "L" on the left
side facing you. Both brackets should
be oriented with the arrow facing up.
6