Casio CTK-2000 User Manual page 15

Turning off power clears sampled data!
Turning off power will cause any sampled sound data on the
keyboard to be deleted.
■ How sampled sounds are played
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.
C4
Starting a Sampling Operation Manually
1.
3
Press a number of times until "SmplAuto"
appears on the display (page E-4).
S m l A u t o
p
2.
bn
Press (10-key) [–] key to select the OFF
setting.
This enables manual sampling. When this setting is
selected, sampling will not start until you press
• When the above setting is "oFF", sampling starts when
4
you release , not when you press it. Sampling will not
4
start if you keep depressed.
Applying Effects to a Sampled Sound
You can apply various effects to the sample sound stored at
tone number 401.
1.
bn
Use
402 to 411.
Tone numbers 402 to 411 actually represent effects
assigned to tone number 401. Selecting a tone will play
the sampled sound in a loop, along with the applicable
effect, as described below.
Effect
Name
402 Loop 1
403 Loop 2
404 Loop 3
405 Pitch 1
406 Pitch 2
407 Pitch 3
408 Tremolo
4 409 Funny 1
.
410 Funny 2
411 Funny 3
Controlling the Keyboard Sounds
(10-key) to select a tone number from
Description
Loops the sampled sound.
Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.
Loops the sample sound and lowers the
pitch of the resonating sound when the
keyboard key is released.
Changes the pitch from low to high, at an
increasing rate.
Changes pitch from high to low, at a
decreasing rate.
Changes pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.
Alternates volume between high and low.
Adds vibrato and changes pitch by a
gradually increasing amount.
Alternates between high pitch and low
pitch.
Adds vibrato and changes pitch from low
to high.
E-13