Advertisement
Table of Contents
Rock-Steady Shop Stand Corner Stand Assembly Instructions
Effective September 2021
Review full instructions prior to use for important safety information.
Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
Advertisement
Table of Contents
Related Manuals for Rockler 66877
Summary of Contents for Rockler 66877
- Page 1 Rock-Steady Shop Stand Corner Stand Assembly Instructions Effective September 2021 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
- Page 2 • Keep children and bystanders away from the tool the Instructions and safety warnings for your product (see the Instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;...
- Page 3 Install the Levelers 1. Unscrew and remove the top hex nut from each of the 4. Attach the other two 32" Stretchers to the remaining 90° Leveling Feet. Legs with two 5/16"-18 Carriage Bolts, Washers and 5/16"-18 Nuts at each intersection, making sure that the 2.
- Page 4 Before fully tightening the nuts, use a square to make sure that 11. Apply the Rockler sticker to one of the Front Stretchers. the Stretchers and Legs are joined at 90°. We recommend centering it on the lower Front Stretcher.
Need help?
Do you have a question about the 66877 and is the answer not in the manual?
Questions and answers