Related Manuals for Rockler 53038
Summary of Contents for Rockler 53038
- Page 1 JIG IT Knob and Pull Pro Drilling Guide Instructions Effective April 2021 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
-
Page 2: General Safety Warnings
• Keep children and bystanders away from the tool the Instructions and safety warnings for your product (see the Instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;... -
Page 3: Parts List
Adjustable Leg final workpiece. Fence Drill Guide Carriage The Rockler JIG IT Knob and Pull Pro Drilling Guide works for installations anywhere from 1" to 8 ⁄ " from the edge of drawer Drill Guide Back Plate... - Page 4 Setting the Drilling Guide for Your Hardware When installing pulls, it will be helpful to know the pulls' center-to-center distance – the distance from the center of one mounting hole to the center of the other. Often, this information can be found on the package or website listing for the product.
- Page 5 Positioning the Drilling Guide 8. Make sure that the Guide hasn't shifted and then use the Drill Guide Bushings (6) to drill the mounting holes for your for Mounting a Single Pull hardware. The best way to do this is to insert the bit into the Bushing and start the drill.
- Page 6 Positioning the Drilling Guide for Mounting Two Pulls > If your application requires that the hardware be installed less than 1" from the reference edge, you will need to attach a shop-made wooden spacer to the bottom face of the Fence (2) using screws (not included) driven through the pre-machined mounting holes.
- Page 7 Drill Guide Bushing (6) in the Adjustable Leg (2). 4. If necessary, shift the Drilling Guide until the hole in the Check Rockler.com for updates. If you have further questions, please Drill Guide Bushing (6) on the Fixed Leg (1) is centered on contact our Technical Support Department at 1-800-260-9663 the intersection of the lines you drew in Step 1.
- Page 8 53038 Distributed by Rockler Companies, Inc. 1-800-279-4441 Rev 04/21 4365 Willow Dr. Medina, MN 55340 www.rockler.com...
Need help?
Do you have a question about the 53038 and is the answer not in the manual?
Questions and answers