Download Print this page

Installation Notes - Polaris NP300 Maxx Installation Manual

Advertisement

Installation Notes

The wiring and installation of this unit requires special technical skill and experience.
If you do not feel confident installing this product or do not have the level of skill
necessary, please contact Polaris on 1300 555 514 so we can refer to a recommended
installer.
This unit is designed to be used in a vehicle with a 12 volt battery and a negative
grounding. Before installing this unit to a recreational vehicle, bus, or truck, make sure
the battery voltage is appropriate for this unit to be used.
To avoid short circuit in the electrical system, ensure that the negative battery cable is
disconnected before installation.
To avoid possibility of shorting out the electrical circuit in the unit, never connect the
battery wire directly to the vehicle battery.
Always secure all wirings with cable clamps or adhesive tape to prevent short circuit.
Please make sure all wiring connections and speaker wires are well insulated.
When pulling the dash apart, please use quality trim tools to avoid damaging your
dash.
Please do NOT cut any plugs off of any Polaris cameras. Doing so will void your
warranty! If you need to blend other brand cameras into our system, please call Polaris
on 1300 555 514 so we can refer you to a recommended dealer who has the skill and
experience in performing this type of work.
If there is something you are not 100% sure about when installing this unit, please give
our experienced technicians a call on 1300 555 514.
3

Advertisement

loading