Table of Contents
Advertisement
Original installation and operation manual
10.3.2 Functional test
Illustration
10.3.3 Visual inspection
During the visual inspection of the BEKOMAT
damaged components immediately.
10.3.4 Leakage test
The leakage test is a non-destructive test method and is used to prove leak tightness in vacuum and overpressure
systems. The leakage test can be carried out in different ways. BEKO TECHNOLOGIES provides no recommendations
for selecting a testing process. The operating company of the pressurised system is responsible for the selection and
specification of the test method to be used, which should be executed in corresponding to with valid standards and
regulations (e.g. DIN EN 1779).
Description / explanation
Press the TEST button for 2 ... 5 seconds.
0 The red ALARM LED is off.
0 The green VALVE LED is on.
0 The green POWER LED is on.
0 The valve opens and condensate is drained.
, inspect all components for mechanical damage and corrosion. Replace
®
BEKOMAT
13i / 13i CO / 13i CO PN50
®
57 | 76
Advertisement
Table of Contents
