Download Print this page

Kohler 72678M-7 Installation Instructions Manual page 3

Wall-mount dual shower faucet

Advertisement

Ø30 mm
Tornillos
Setscrews
Punto central
Centerpoint
Instale el montaje de ancla superior (72678M-7)
□ Ensaye la instalación del kit de la barra de desplazamiento para determinar la ubicación del montaje de la ancla
superior.
□ Desplace la base en el conector que se inserta en la base alrededor de 26 mm.
□ Atornille la base con la llave hexagonal y aprételos.
□ Ajuste manualmente la tuerca con la arandela de goma a la salida de la grifería.
□ Coloque la base de la grifería sobre la pared terminada.
□ Marque el diámetro de la base con un lápiz.
□ Afl oje la tuerca manualmente, quite la arandela de goma y remueva la barra de regadera.
□ Afl oje los tornillos con una llave hexagonal. (NOTA: No pierda los tornillos.) Retire la base.
□ Marque el punto central del diámetro de la base con un lápiz.
□ Perfore un orifi cio en el punto central como el diámetro de las anclas.
□ Presione un ancla en el orifi cio.
□ Asegure la base, mediante un tornillo con arandela, asegúrese que los dos orifi cios del tornillo de la base estén hacia
debajo de forma vertical.
Install the Top Base Assembly (72678M-7)
□ Dry fi t the slidebar kit to determine the anchor mounting location.
□ Slide the base onto the connector approximately 26 mm.
□ Thread the setscrews into the base with the hex wrench and tighten.
□ Hand-tighten the nut with the washer onto the faucet outlet.
□ Place the base against the fi nished wall.
□ Trace the diameter of the base with a pencil.
□ Loosen the nut by hand, then remove the washer and slidebar kit.
□ Loosen the setscrews with the hex wrench. (NOTE: Do not lose the setscrews.) Remove the base.
□ Mark the centerpoint of the base diameter with a pencil.
□ Drill a hole on the centerpoint to accommodate the anchor size.
□ Press the anchor into the hole.
□ Secure the base with the self-tapping screw and washer, making sure the two setscrew holes are facing downwards.
1124467-M2-B
Ancla
Anchor
Base
Base
Arandela
Washer
Tornillo
Screw
Llave hexagonal
Hex Wrench
Conector
Connector
Barra desplazamiento
Slidebar
3
Tuerca
Arandela
Nut
Washer
Salida
Outlet
Kohler Co.

Advertisement

loading

This manual is also suitable for:

72678m-b778298m-b7