General Maintenance - Promeba PS-190 User Manual

Evacuation chair with tracks
Hide thumbs Also See for PS-190:
Table of Contents

Advertisement

USER GUIDE //
EVACUATION CHAIR WITH TRACKS PS-190
Review 2021/09
04

GENERAL MAINTENANCE

CLEANING
It is essential to keep the equipment clean to ensure a proper use
and durability of the set. A thorough clean must be done perio-
dically, especially in areas exposed to dirt that may be damaged
such as gears or mobile elements.
Do not use high-pressure cleaning systems, neither bleach to di-
sinfect the product, they can damage it. Instead, use a hydroalco-
holic based disinfectant, wash with water and let it dry naturally,
do not use sources of direct heat to dry.
MAKE SURE TO KEEP AREAS FROM FIGURES ON THE RIGHT FREE
OF WATER AND HUMIDITY. TAKE SPECIAL CARE NOT TO GET THEM
WET WHILE WASHING THE SET.
MOBILE ELEMENTS
Check for loose, missing, or worn parts.
Periodically inspect all moving parts to ensure components are
tight. Due to the intense and continuous use of elements such
as handles or levers, it is important to periodically examine their
correct operation.
LUBRICATE
Generally, all moving parts must be lubricated. Our products leave the factory completely lubricated. Howe-
ver, it is possible that the elements lose lubrication with the passage of time and the use of the product,
either due to loss of lubricant or dirt.
Periodically clean and lubricate affected areas.
Never lubricate the belts. Lubrication can cause the belts to perform unpredictably, which can cause injury
to the patient and/or operators.
WEAR AREAS
Inspecting regularly on the system components for signs of wear is a preventive measure that can reduce
breakdowns. Check possible lubricant leakages, grooves or bearing in poor condition.
MECHANICAL FIXING
We call mechanical fixing elements to the components used to fix the product as a whole, mainly screws
and derivatives.
For some conditions of use, due to vibrations or impacts, certain elements may lose their tightening torque
or fixing properties. Periodically check for loose items, especially moving parts. Inspect any mechanical
connections. Always observe and adhere to the recommended tightening torques.
REPLACEMENT OF COMPONENTS
In the event that certain mechanical parts need to be replaced by qualified service personnel, they should
contact our sales department for more information on ordering spare parts and their installation.
MAINTENANCE SUMMARY
DISINFECT
CLEAN
INSPECT
LUBRICATE
SPRINGS REPLACEMENT
WHEELS REPLACEMENT
20
EVERY USE
WHEN NEEDED
X
X
X
X
EVERY MONTH
EVERY YEAR
X
X
X
EVERY 4 YEARS
X

Advertisement

Table of Contents
loading

Table of Contents