Important Safeguards; Power Supply; Bass And Treble - Telefunken TF-PS2304 Instruction Manual

Instruction manual

Important safeguards

• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
• Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.

Power supply

• The unit operates on an internal
rechargeable Li-ion battery and 220V
mains via adapter.
• The battery can be recharged with the
provided DC power adapter. Before first
plugging the adapter check that voltage
indicated on the rating label corresponds
to the mains voltage in your home.
• Insert the adapter into the
DC 13.5V socket on the unit.
• Plug the adapter to the power source.
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
• Push the OFF/ON switch into ON
position (to the right) to switch the unit
on. Put it into OFF position (left) to
switch off.
3
General operations
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately
within 10 meters in direct line of sight.
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press the
MODE button repeatedly to select the
Bluetooth mode (selected by default). The
display will show "blue".
• Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-PS2304).
• If asked for a passcode, enter "0000".
• The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
• The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
• When playing files, you can press
the button to pause and resume
playback.
• Press the
or
go to a previous or next track.
Rotate the volume knob or press
the volume buttons on the RC to
adjust volume.

Bass and treble

• Push the volume knob
once and rotate it to adjust bass. Push
the knob twice and rotate to adjust treble.
You can also press the BASS and
TREBLE buttons on the remote.
button to