Table of Contents
Advertisement
Instruction manual
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
• Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
Power supply
• The unit operates on an internal
rechargeable Li-ion battery.
• The battery can be recharged with the
provided USB charging cable. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds
to the mains voltage in your home.
• Insert the charging cable into the
DC 5V socket at the top panel of the unit.
• Connect the charging cable to the power
source. The unit is charging when the red
LED indicator is on.
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
• Press the POWER button into ON
position to switch the unit on. Put it into OFF
position to switch off.
General operation
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately within
10 meters in direct line of sight.
3
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press the
M button repeatedly to select the
Bluetooth mode (selected by default).
• Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-PS1243B).
• If asked for a passcode, enter "0000".
• The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
• The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
• When playing files, you can press
the
button to pause and resume
playback.
• Press the
or
to a previous or next track. Press and
hold these buttons to decrease or
increase volume, respectively.
External device connection
• You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
• To connect an external audio device,
please use the supplied audio cable with
3.5mm-to-3.5 mm plugs to connect the
headphone out or audio line-out of the external
device to the AUX input of this unit.
• Press M button to select the AUX mode.
• Turn on the external device. You can
press and hold the
adjust the volume.
TWS mode (Twins True Wireless
Bluetooth Stereo)
• This feature enables you to connect
two audio systems to work from one
source at the same time in stereo mode.
button to go
and
buttons to
Advertisement
Table of Contents
