Table of Contents
Advertisement
ENGLISH
Š Children should be supervised to ensure that they do not
play with the appliance.
Labels on tool
The following symbols are shown on the tool along with the
date code:
:
Warning! To reduce the risk of injury, the user
t
must read the instruction manual.
f
Wear eye protection
g
Wear ear protection.
Machine not suitable for connection to the potable
water mains.
#
Electrical safety
This tool is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on the
rating plate.
Features
This appliance includes some or all of the following features.
1. High pressure hose
2. Spray wand
3. Nozzle button
4. Spray handle
5. Spray handle grip
6. Trigger lock-off
7. Trigger
8. Pressure washer unit
9. ON button
10. OFF button
11. Handle
12. Garden hose water intake
13. High pressure water outlet
14. Nozzle cleaning tool
15. Power cord
8
(Original instructions)
Never direct the water jet at people,
animals, the machine or electric
components
16. Soap bottle
17. Cord retaining hook
18. Turbo nozzle
19. Spray fan to pencil jet nozzle
20. Hose connector
21. Filter
22. Hose connect button
23. Soap bottle applicator
Assembly
Warning! To reduce the risk of serious personal injury, turn
unit off and disconnect it from power source before making
any adjustments or removing/installing attachments or acces-
sories. An accidental start-up can cause injury.
Attaching Spray Handle (Fig. A)
To connect the spray handle ( 4 ) to the spray wand ( 2 ),
u
insert the end of the spray handle onto the end of the
spray wand.
Press in and turn the spray handle counterclockwise to
u
lock it into position.
Attaching High Pressure Hose (Fig. B)
Notice: Never pull high pressure hose or water supply hose
to move pressure washer. This could damage hose and/or
pump inlet and/or pump outlet.
To connect the high pressure hose ( 1 ) to the
u
spray handle ( 4 ), depress the hose connect button ( 22 )
while clicking the hose end ( 24 ) into the spray handle.
Release the hose connect button when the hose end has
clicked into position.
To connect the high pressure hose to the pressure washer
u
unit ( 8 ), screw the hose collar ( 25 ) onto the high pres-
sure water outlet ( 13 ).
Note: Uncoil the high pressure hose before installation to
prevent kinks.
Note: Avoid cross threading when installing the hose. Cross
threading will cause leaks.
Attaching Garden Hose (Fig. C)
Note: Before connecting the garden hose to the pressure
washer unit, run water through the garden hose for thirty
seconds to clear any debris from inside the garden hose.
To connect the garden hose to the pressure washer
u
unit ( 8 ), screw the filter ( 21 ) to the water intake ( 12 ).
Connect the garden hose to the hose connector ( 20 ) by
u
loosening the screw of the garden connector and attach-
ing the hose onto the connector.
Attach the garden hose ( 26 ) mounted onto the garden
u
connector to the filter ( 21 ) until it "clicks".
Note: Always disconnect the garden hose after usage.
Attaching Nozzles (Fig. D)
Danger! Risk of fluid injection. Do not direct discharge
stream toward persons, unprotected skin, eyes or any pets or
animals. Serious injury will occur.
Warning! Flying objects could cause risk of serious injury. DO
Advertisement
Table of Contents
