Advertisement
Step 4: Turn the assembly over and place the snooker table (B9) onto the assembly.
Align the holes on the legs (B1) with the four corners of the snooker table (B9). Place a
washer (B3) over one of the aligned holes and using the Allen key (E11), insert and tighten a
25mm M6 screw (B2) through the washer (B3). Repeat this process with all aligned holes.
Insert the levelling feet (E12) onto each of the legs (B1).
B2 (x16)
B3 (x16)
E11 (x1)
E12
B1
B9
B1
B2
B3
Advertisement
