Advertisement
TABLE ASSEMBLY
Step 1: Place a foam ring (E2) over each end of the player rods (A4–A11). Insert the player
rods (A4–A11) into the holes of one side panel (A1) arranged as below.
E2
Notes:
• The arrows shown above indicate the direction the players should be facing.
• The heads of the players should be facing down during assembly.
Step 2: Insert the player rods (A4–A11) into the holes of the other side panel (A1). Ensuring
the green side is facing up, slide the foosball table (A3) into the grooves of the side panels
(A1).
A1
A3
A1
Advertisement
