Step 3: Align the grooves of the end panels (A2) with the foosball table (A3). Using a
screwdriver (not supplied), secure the side panels (A1) to the end panels (A2) with 25mm
M3.5 screws (A13).
With the metal cam insert facing up, place the wooden supports (A12) across the bottom of
the foosball table (A3). Using a screwdriver, secure each end of each wooden support (A12)
with one 25mm M3.5 screw (A13).
A13 (x12)
A2
A1
A3
A12
A13
A13