simultaneously while turning the radio
ON.
• Wait for 3 seconds before releasing the
buttons until the audible tone is heard.
3.
Place the Source radio in the source pocket that
pairs with the target pocket you chose in step 1.
Press and release the SB1 button.
4.
After cloning is completed, the Source radio will
announce either "successful" (cloning is
All manuals and user guides at all-guides.com
Notes:
•
If cloning fails, refer to "What To Do If Cloning
Fails" on page 55.
•
Paired Target radios and Source radios must be
of the same band type in order for the cloning to
run successfully.
•
MUC pockets numbers should be read from left to
right with the Motorola logo facing front.