Table of Contents
Advertisement
Rear Terminal Block Configuration
SOUND
DW
STOP
CH1
CH2
CH3
CH4
CH5
① Terminal for power input.
② The auxiliary terminal block outputs power that can operate auxiliary
equipment.
- Input voltage (DC12V) : DC11V output
MAX.
MIN.
- Input voltage (DC24V) : DC23V output
- Input voltage (AC) : DC24 ± 10% output
③ COM terminal for channel selection. Refer to Page2 for connection
VOL.
method information.
④ Sound channel selection terminal. You can select the sound by using
external contact or transistor.
⑤ SOUND DW : When the terminal is connected, playback volume
is reduced by 15dB.
⑥ Stop playback (STOP) : When the terminal is connected during play-
back, playback stops.
Bit/ Binary input method using rear
terminal block
■ Bit Input Mode
• Bit input mode(using external line) allows you to select one of five
sound options by switching on one of the 5 channels(Ch1 - Ch5).
• Total of 5 sound options are configurable.
■ Binary Input Mode
• Binary input mode(using external line) allows you to receive multiple inputs
by using the 5 channels(Ch1 - Ch5) to configure one of 30 sound options.
• Total of 30 sound options are configurable.
■ Wiring through terminal block with either external contact
or NPN transistor allows either bit or binary input method for
sound channel selection.
Terminal box
POWER
EXTERNAL CONTACT
BUSY
Please note that the
※
switches shown on the
table is to explain how
to wire the terminal block.
COM
Actual products do not
have switches attached.
Bit input mode
Can select up to
5 sound options
Binary input mode
Can select up to
30 sound options
CH3
CH4
CH5
Connects power
POWER
Provides auxiliary
BUSY
power output
during operation
COM
SOUND SET
ON
1 2 3 4
SOUND
STOP
CH1
CH2
CH3
CH4
DW
CH1
CH2
CH3
CH4 CH5
ON(1)
OFF(0)
No.
1
2
3
4
0
0
0
0
0
1
1
0
0
0
2
0
1
0
0
3
0
0
1
0
4
0
0
0
1
5
0
0
0
0
0
0
0
0
0
1
0
0
0
0
2
0
0
0
1
29
1
1
1
0
30
1
1
1
1
BUSY
COM
SD Card Specifications and Sound
Saving Manual
SOUND
• SD card specifications
STOP
CH1
CH2
CH3
CH4
DW
- Use standard SD card.
- Mini SD or Micro SD also can be used
with adaptor.
- SD, SDHC type supported
- Storage capacity : Max. 32GB
- Class : No specification
• Please save the MP3 sound file on the SD card as shown below.
• Create an "MP3_FILE" folder on the SD card and save the MP3
file in the following file format.
• MP3 file format
23
_
• When saving files, please save them in order.
- Please start saving after formatting the SD card.
• The length of the file name must not exceed 20 characters.
[Example]
Volume Adjustment
• The volume output of this product is adjustable.
• Turn the volume dial clockwise to increase the volume, and
turn counter clockwise to decrease the volume.
• There will be no sound when the dial is put at MIN.
CH5
COM
5
0
0
0
0
0
1
0
1
0
1
0
5
CH5
For Elise
.mp3
Filename (Up to 40 characters)
Separator (Track# and file title)
Track# (01-30)
01_Fire.mp3
02_Emergency.mp3
03_For Elise.mp3
30_Cuckoo's Waltz.mp3
MAX.
VOL.
Volume Dial
MIN.
Advertisement
Table of Contents
