Table of Contents
Advertisement
Operation Indicator
SOUND SET
SD CARD
ON
ON
RUN
1 2 3 4
① The red indicator light is on when voltage is supplied to the power
terminal.
② The green indicator light is on when the product is operating normally.
Front Control Configuration
SD Card Slot
Sound
Selection
Switch
SOUND SET
ON
1 2 3 4
Sound Setting
SOUND
DW
STOP
CH1
CH2
CH3
CH4
CH5
■ Select Built-in Voice Group
• This is used when built-in sound mode is selected.
• Select between the six sound groups.
• Every group has 5 type of sounds.
How to select bit type sound group
ON(1)
OFF(0)
No.
2
3
4
1
0
0
1
2
0
1
0
3
0
1
1
4
1
0
0
5
1
0
1
6
1
1
0
■ Selection between Built-in Sound and External Sound
(SD Card Type)
• To play built-in sounds, set the sound setting
switch to the OFF (0) position.
• To play an external sound on the SD card, insert
the SD card into SD card slot and set the sound
setting switch to ON (1).
MAX.
MIN.
SOUND SET
Red steady light
ON
VOL.
Green flashing light
1 2 3 4
PLAY MODE
Front Control Panel
Volume Switch
Play Mode
Selection
Switch
MAX.
SD CARD
PLAY MODE
POWER
•
Select between built-in sounds and external
sounds (SD Card) using the sound selection
switch.
• Please be conscious of the number selected
BUSY
for your desired sound option.
- Switch 1 : Can select between built-in sound
COM
and external sound options (SD Card).
- Switch 2,3 and 4 : Can select sound group
from built-in sounds.
Sounds
SOUND
DW
POWER
STOP
CH1
5 Warning Sounds
CH2
5 Special Warning Sounds (1st Group)
BUSY
CH3
5 Melodies
CH4
5 Alarms
CH5
COM
5 Special Warning Sounds (2nd Group)
5 Special Warning Sounds (3rd Group)
Removing the Front Cover
SOUND SET
ON
MAX.
MIN.
SD CARD
VOL.
1 2 3 4
PLAY MODE
① Loosen the cover fixing bolt (M3) fastened at the bottom of the
product.
② Gently press down the front cover and pull it down. (be careful that
the cover may fall off if you apply excessive force.)
SOUND SET
ON
Play Mode Setting
MIN.
• Can select between channel input methods (bit/ binary) and
VOL.
various playback modes.
• Use a (-) flat screwdriver to rotate one space at a time.
(regardless of the direction of rotation.)
• Switch 0 and 9 have no function.
SOUND
STOP
CH1
CH2
CH3
CH4
CH5
DW
SOUND
DW
POWER
STOP
CH1
CH2
BUSY
CH3
CH4
CH5
COM
1 Bit Input Mode
2 Binary Input Mode
Bit Input Hold
3
Playback Mode
Binary Input Hold
4
Playback Mode
Bit Input Sound
5
Reduction Mode
Binary Input Sound
6
Reduction Mode
Bit Input Sequence
7
Memory Playback
Mode
8 Test Mode
4
SOUND
DW
POWER
STOP
CH1
CH2
BUSY
CH3
SOUND SET
Removing the front cover
CH4
ON
COM
CH5
ON
RUN
1 2 3 4
1 2 3 4
SOUND
STOP
DW
PLAY MODE
PLAY MODE
• Play back one of the 5 built-in or external
sounds once
• For a built-in sound, the playback time is
about 10 seconds
• Play back one of the 30 built-in or external
sounds once
• For a built-in sound, the playback time is
about 10 seconds
• Play back one of the 5 built-in or external
SOUND
STOP
CH1
CH2
CH3
CH4
CH5
DW
sounds continuously
• Play back one of the 30 built-in or external
sounds continuously
• Decrease the volume of the selected channel
by 15dB
• Play back one of the 5 built-in or external
sounds continuously
• Decrease the volume of the selected channel
by 15dB
• Play back one of the 30 built-in or external
sounds continuously
• When other channel signals are continuously
inputted within 3 seconds after inputting the
channel, the input order is memorized and
playback in the memorized order (playback
time is 3 - 5 seconds)
• The last input channel is played continuously
(Bit input only)
• In the test mode, the Ch1 of the built-in sound
or the external sound is automatically played
continuously
• Switch back to another mode to exit test mode
SOUND SET
SD CARD
ON
1 2 3 4
SOUND
CH1
CH2
CH3
CH4
CH5
Play mode switch
DW
STOP
CH1
Can rotate
CH2
regardless of
CH3
direction
CH4
CH5
Advertisement
Table of Contents
