Qlightec QMPS Manual

Qlightec QMPS Manual

Panel mount audible alarm

Advertisement

Quick Links

Panel Mount Audible Alarm
QMPS
98dB
25
50
54
Thank you for purchasing Qlight's products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, and or malfunction of the
product that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
-
QMPS
[Model number]
[Voltage]
|
• QMPS
• 12/24-DC12V-24V
• 110/220-AC110V-220V
Please scan the QR code for
more detailed product information.
www.qlight.com
95dB
Product Specifications
12/24
Model
number
|
QMPS
※ DC type model has a free-voltage range of DC10V-30V.
※ AC type model has a free-voltage range of AC100V-240V.
※ CE Compliant, UL Listed : DC12V/24V
• Protection rating : IP54
• Ambient operating temperature : -25°C to +50°C
Sound Volume
Voltage
Current
DC12V-24V
Max. 0.750A
• Warning : 98dB
• MP3 : 95dB
AC110V-220V Max. 0.100A
1
Input Method/
Certificate Weight
(dB)
No.of ch
Bit Input : 5Ch
Binary Input : 30Ch
0.35 kg
0.53 kg

Advertisement

Table of Contents
loading

Summary of Contents for Qlightec QMPS

  • Page 1 No.of ch [Model number] [Voltage] DC12V-24V Max. 0.750A 0.35 kg • Warning : 98dB Bit Input : 5Ch • QMPS • 12/24-DC12V-24V QMPS Binary Input : 30Ch • MP3 : 95dB • 110/220-AC110V-220V AC110V-220V Max. 0.100A 0.53 kg ※ DC type model has a free-voltage range of DC10V-30V.
  • Page 2: Wiring Instructions

    Dimensions (Units : mm) QMPS 2 - Mounting Bracket SOUND POWER STOP BUSY Wiring Instructions • When wiring the product with an external transistor, both NPN and PNP type transistors can be used. QMPS-DC QMPS-AC EXTERNAL CONTACT EXTERNAL CONTACT SOUND DW...
  • Page 3: Parts Definition

    Parts Definition Back Cover (ABS) Body (ABS) Terminal Block Operation Rubber Packing Mounting Bracket Indicator Terminal Block Cover (PC) Front Cover (ABS) Volume Switch Play Mode Setting Switch Sound Selection Switch SD Card Fixing Bolt SD Card Slot - SD cards are sold separately. Installation SOUND POWER...
  • Page 4: Operation Indicator

    SOUND POWER Operation Indicator Removing the Front Cover STOP BUSY SOUND SET SOUND SET Removing the front cover SOUND SET SD CARD MAX. MIN. MAX. MIN. SOUND SET SOUND SET SD CARD SD CARD 1 2 3 4 Red steady light VOL.
  • Page 5: Volume Adjustment

    BUSY Rear Terminal Block Configuration SD Card Specifications and Sound Saving Manual SOUND • SD card specifications STOP - Use standard SD card. SOUND Connects power - Mini SD or Micro SD also can be used POWER STOP with adaptor. - SD, SDHC type supported Provides auxiliary BUSY...
  • Page 6 Sound Type and Combination Manual ■ Bit Input - Playing Built-in Sound ■ Binary Input - Playing Built-in Sound • In bit input mode, you can chooses one sound from 5 sounds • In binary input mode, you can chooses one sound from 30 by configuring the 1 channels.
  • Page 7 Sound Type and Combination ■ Bit Input - Playing External Sound (SD Card) ■ Binary Input - Playing External Sound (SD Card) • User can save sounds(MP3) to the SD card and able to select • Binary input mode chooses one of the 30 sounds by combining 1 sounds from 5 saved sounds.
  • Page 8 Operation Method and Setting When Using a Built-in Sound Source When Using an External Sound Source (SD Card) Bit input Binary input Bit input Binary input Play one of five sounds from Play one of 5 sounds stored Play one of 30 sounds stored Play one of 30 sounds by the user 6 groups...
  • Page 9 Product installation direction ■ Install the product in accordance with the manual. Otherwise rainwater or moisture may penetrate into the product. ㆍBEACON/SIGNALING LIGHT ※ For products with a protection rating of less than IPX4, please install it vertically. Power cord inlet part shall not be facing the sky. ㆍ...
  • Page 10 MEMO...
  • Page 11 MEMO...
  • Page 12 RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507) Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805) www.qlight.com EN - QMPS - 2206A...

Table of Contents