Panasonic KX-FP342CX Service Manual page 69

Test Mode Type of
MOTOR TEST Service
MODEM TEST Service
ROM CHECK Service
SCAN CHECK Service
LCD CHECK Service
DTMF SINGLE Service
TEST
KEY CHECK Service
MEMORY Service
CLEAR
PRINT TEST Service
PATTERN
Code
Mode
Operation after
code input
"5" "5" "6"
Mode
START
"5" "5" "4"
Mode
START
"5" "5" "1"
Mode
START
"5" "5" "5"
Mode
START
"5" "5" "8"
Mode
START
"5" "5" "2"
Mode
1....ON
2....OFF
"5" "6" "1"
Mode
START (any
key)
"5" "5" "0"
Mode
START
"8" "5" "2"
Mode
START
Rotates the transmission and reception motor to check
operation of the motor.
12: Document feed
24: Recording paper is fed
Press [STOP] button to quit.
Telephone line circuit is connected automatically, output
the following signals on the circuit line.
1) OFF 2) 9600bps 3)7200bps 4) 4800bps
5) 2400bps 6) 300bps 7) 2100Hz 8)1100Hz
Indicates the version and checks the sum of the ROM.
Turns on the LEDs of the CIS and operates the read
systems.
Checks the LCD indication.
Illuminates all the dots to check if they are normal.
Outputs the DTMF as single tones. Used to check the
frequencies of the individual DTMF tones. Refer to
SINGLE TONE TRANSMIT SELECTION
Checks the button operation.
Indicates the button code on the LCD while the button
pressed. Refer to BUTTON CODE TABLE
To reset the value to the default one, except the top
(#853), time/day (#001), logo (#002), Fax ID, History,
Directory.
Please restart a powersupply after clearing a memory.
Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See
69
Function
().
().
PRINT TEST PATTERN ())