Anode Types; Saddling - Pipe Work - Rheem Water Heater User Manual

INSTALLATION – SOLAR STORAGE TANK

ANODE TYPES

The correct anode type for the water supply being used must be fitted in the
water heater (refer to
as standard.
Total Dissolved Solids in water supply to the water heater

SADDLING - PIPE WORK

To prevent damage to the cylinder when attaching pipe clips or saddles to the
water heater jacket, we recommend the use of self-drilling screws with a
maximum length of 12 mm. Should pre drilling be required, extreme caution
must be observed when penetrating the jacket of the water heater.
Note: Damage to the cylinder as a result of saddling to the jacket will void
the warranty.
"Water Supplies"
0 – 40 mg/L
40 – 600 mg/L
600 – 2500 mg/L
32
on page 56). The black anode is fitted
Anode colour code
Green
Black
Blue