Section 2: Structure; Structure - Emerson Bettis RTS Installation, Operation And Maintenance Manual

Section 2: Structure

July 2021
Section 2: Structure
Figure 1 shows e.g. a CM-32 actuator with mounted LK100 linear unit. The linear unit
itself consists essentially of a solid cast housing, a mounted spindle nut and a non rotating
spindle, see Figure 2. To prevent contamination by dusty ambient air and to ensure the
mechanical protection, the linear unit is completely sealed with O-Rings at the output.
Figure 1
2
CM-32-Actuator with Mounted LK100 Linear Unit
Installation, Operation and Maintenance Manual
VCIOM-15429-EN Rev. 1

Structure