Advertisement
Locking mode:
In this mode, all three axes are locked.
The camera stays still and stable. It will not follow
the movement of the handle.
Switching modes
By default, the gimbal is set to the pan and tilt following mode. There are two ways to switch
modes: Pressing the power/mode button on the gimbal, or tapping the mode selection icon
in the 'Gimbal Pro' app.
Using the power/mode button:
1. Press the power/mode button once to enter pan following mode.
2. Press the power/mode button again to enter the locking mode.
3. The gimbal will cycle through these modes on subsequent presses.
Using the 'Gimbal Pro' app:
Tap on the mode selection icon and select the desired mode. The desired mode will be
reflected on the mode status in the app.
Joystick
Slide the joystick to control movement of the pan, tilt, and roll motors (dependent on the
selected mode).
Shutter button
Press the shutter button to take a picture or start/stop recording a video.
¼" thread screw
Allows the gimbal to be mounted on other devices with a compatible ¼" thread, such as a
tripod or mount.
12
Advertisement
