Radio Shack TAD-222 Owner's Manual page 15

Touch tone remote control telephone answering system

Table of Contents

43-722.fm Page 15 Friday, August 13, 1999 1:16 PM

Problem

You cannot operate the TAD by

remote.

Cause/Solution

• You are using a pulse phone. Use a touch-

tone phone or pocket tone dialer.

• The tone output from the phone or tone

dialer is not long enough. Use another

phone or dialer. The phone or pocket tone

dialer must be capable of sending a con-

tinuous tone while you hold down the but-

ton.

• You did not correctly enter the remote

operation security code. Enter the code

within 8 seconds, and make sure you

press the number for at least 2 seconds.

• You did not enter a remote command

within 8 seconds after the command

prompt. (The TAD beeps and hangs up.)

Table of Contents