Change The Hepa Filter; Troubleshooting - Beko ATP5100I User Manual

Change The Hepa Filter

8
Always unplug the unit before changing the
HEPA filter.
1. When the filter change indicator illuminates in
white, it's time to change the HEPA filter. Fig. 3
2. Turn off the unit and unplug it.
3. Carefully rotate the body anticlockwise and
remove it from the air inlet grill.
4. Remove the HEPA filter out of the air inlet grill.
5. Remove the pre-filter.
6. Replace a new HEPA filter into the air inlet grill.
7. Put the body onto the air inlet grill, then rotate
the body clockwise until the fastener locks into
the groove.
8. Simultaneously hold and Touch the Power
and Timer buttons for 3 seconds to activate the
filter function.

Troubleshooting

9
Problem
Unit will not operate.
Decreased air flow.
Air Purifier / User Manual
Solution
Check to make sure the unit is plugged in.
Check to make sure the unit is on.
Check condition of the filter and replace if necessary.
Check to ensure nothing is blocking the air inlet and
filtered air outlet.
Be sure the plastic bag has been removed from the filter.
13 / EN