Advertisement
RBT S1 Stereo Camera - Alphabetical Feature List
Autofocus: AF
Infrared sensor on front right side, active multibeam system for accurate single spot
focus. Range, 0.6 meter to infinity. When sensed object is closer than 0.6 meter,
" AF " blinks in the
focus) button to override.
To activate autofocus, depress the
completes, the green "
May not work properly with small, dark, reflective or light-emitting objects,
fog or smoke, or when shooting through windows.
When autofocus fails, the shutter will not operate, " AF " blinks in the
Display, the green "
lit) are extinguished.
If autofocus is problematic, use
Battery: (2CR5)
Battery condition indications:
Turn
Main Switch
lithium type) battery as soon as possible. When " bc " is continuously displayed,
voltage is inadequate and the camera will not function. Longevity should be
excellent.
Turn Main Switch OFF before replacing the battery.
Removing a battery resets all user settings to their default values.
Critical Shutter speed: (camera-shake guard)
Default value, 1/30sec. Setting range, 1/4 ~ 1/60sec. (1/8 ~ 1/60 for some models.)
Shutter open time will not exceed this value when in P mode. (Risk of
underexposure in low light conditions.)
Enforced only in
Underexposure condition in P mode is indicated by a blinking Critical Shutter
speed value in the
blinking red "
–
Set value is retained until battery is removed.
To set, turn main switch to P.
Press and hold
Current setting appears in Display. (e.g. " 1/30L ")
Adjust with
Depth of field:
Both lenses have a small window near the camera body, one or both of which provide
coarse focused distance indications in meters. Depending on sensed object distance,
the infinity symbol and numbers 3, 1.5, 1, 0.8 and 0.6 come into view.
The window boundaries indicate depth of field at f.16, the two marking lines at f.8.
The red line left of center indicates infrared focus.
At a given aperture's hyperfocal distance H, the depth of field will be from H/2 to
infinity. See
Hyperfocal settings
focus) function.
file://H:\Documents and Settings\Ronald Schalekamp\Local Settings\Temp\rbt s1.HTM
Display
and shutter will not operate. Press the
•
"
lights in the bottom of the Finder.
LED
•
" blinks in the Finder, and the red "
infinity focus
ON. If " bc " blinks in the Display, replace the 2CR5 (6volt
P
mode, but also indicated in
Display
and blinking red "
" appears, which does not usually indicate underexposure.
SELECT
button for more than one second.
Up/Down
buttons.
for S1-specific tables for use with the
Shutter Release
halfway. When focus
or
manual
focus.
A
mode.
–
" in the Finder. In A mode, only the
pagina 2 van 15
MF
(manual
+
" and "
–
" (if
Index
Index
Index
MF (manual
1-10-2012
Advertisement
