Advertisement
RBT S1 Stereo Camera - Alphabetical Feature List
the Display blinks and a red "
probable over- or underexposure. The camera will operate, so there is a risk of
improper exposure.
If " – – – " appears continuously in the Display, turn the Main Switch to
momentarily.
The
Critical Shutter speed
shake is active only in
Rewind button:
Leftmost and smallest control button, recessed and marked R. Initiates rewinding
prior to the end of a roll. Use a pointed object such as a ball-point pen to carefully
depress the button. There is a brief moment when rewinding pauses at the end, so that
an incomplete roll can be removed with its leader still out. (See next.)
Rewinding film:
At the end of a roll, when further advance is impossible, film rewinding
automatically starts.
Displayed exposure numbers count down as rewinding proceeds.
Shortly after " [ 1 ] " is displayed, " [ – – ] " appears in the Display.
The rewind process pauses for a moment, so if the back cover is opened at this
point, the the end of the film leader will remain out of the cartridge.
The pause before the film is completely rewound into the cartridge is brief, so
the cessation of motor sounds can be a helpful indicator. If the back is opened
prematurely, the start of the roll may be exposed to light, but wait a moment
too long and the last bit of film will be completely rewound.
Depending on film, battery, and environmental conditions, rewinding may halt
before completion. Depress the Rewind button to restart.
Rewinding can be halted deliberately if necessary, by turning off the Main
Switch. Rewinding resumes when it is turned on again.
After rewinding is completed, the Display will show a blinking " [ 0 ] ",
indicating that the back should be opened before the camera can be used.
Self-timer:
Press the button marked SELF (the lone button between the MF and Down
buttons) to start the self-timer.
The red self-timer indicator in front will light for 7 seconds, then blink for 3
seconds before the shutter is released.
Focus and exposure are set when the Self-timer button is first pressed, so be
certain that conditions are as desired.
To cancel, turn the
Depress the SELF button while turning the Main Switch ON to enter the
Multiple exposure
SELECT button:
On top, behind the Display.
file://H:\Documents and Settings\Ronald Schalekamp\Local Settings\Temp\rbt s1.HTM
+
" or "
limit function that guards against the effects of camera-
P
mode.
Main switch
OFF.
mode.
–
" blinks in the Finder, indicating
pagina 12 van 15
M
Index
Index
Index
Index
1-10-2012
Advertisement
